A hybrid controller enhancing transient performance for an aerial manipulator extracting a wedged object

📃 Abstract: Autonomous aerial manipulation requires the capability to handle inevitable dynamic changes during physical interaction. Previously, very few studies have addressed the stability and transient performance of the scenarios involving abrupt changes in dynamics. This paper proposes a hybrid controller enhancing transient performance for an aerial manipulator extracting an object wedged in a static structure. This task incurs a significant jump in the interaction force on the end-effector so that the analysis using the concept of hybrid dynamical systems is required. To demonstrate the dynamic characteristics of the object-extracting aerial manipulator, we derive the dynamic equations for two flight modes, i.e., free-flight and object-extracting, and the rule of state jumps. Also, we design control strategies which enhance the transient performance during flight mode transition. Then, the stability of the proposed control law is proven, and the overshoot reduction after the object extraction is analyzed. To show the improved performance, we conduct plug-pulling experiments with a quadrotor-based aerial manipulator using the proposed controller and two different existing controllers. The comparative results confirm that our controller enables the aerial manipulator to maintain its stability after the flight mode transition and shows the best transient performance in overshoot minimization among three controllers.

✊ Motivation:

❗ For various operations that necessarily entail an abrupt change in dynamic model, there needs a controller that can deal with such changes.
❗ Real-world applications such as pulling a plug from a socket, retrieving a device attached to a tall structure, or reclaiming an object in disaster recovery mission

💡 Main contributions:

✔️ Control strategies enhancing the transient performance after flight mode transition
✔️ Theoretical proof that the magnitude of the initial overshoot in the state variable right after the object extraction is bounded
✔️ Plug-pulling experiment as a real-world example of such task

Bibtex

@article{byun2023hybrid,
  title={A Hybrid Controller Enhancing Transient Performance for an Aerial Manipulator Extracting a Wedged Object},
  author={Byun, Jeonghyun and Jang, Inkyu and Lee, Dongjae and Kim, H Jin},
  journal={IEEE Transactions on Automation Science and Engineering},
  year={2023},
  publisher={IEEE}
}